Wykamol Geotex is typically used to isolate and protect the structure from the surrounding soil and relieve hydrostatic pressure by promoting the flow of ground water away from the face of the structure. Wykamol Geotex provides excellent protection from root penetration, and can also increase the structure thermal insulation.
The Wykamol Floor Drain Drainage Channel is a PVC drainage conduit for the control of water ingress in below ground waterproofing situations. Wykamol Floor Drain is flangeless (no up-stand) and can be fitted across the centre of the basement floor, directing any ingress of water towards a sump chamber or drain.
The Wykamol Flexi Jetting Eye is designed to act as an inspection port for a perimeter drainage channel and allows for easy cleaning of the system. The unique flexible up-stand jetting point can be easily bent to allow the channel to be used in a wall port system.
Wykamol Fibre Tape is used to join together plaster mesh membranes which you can then plaster directly onto or apply a dot and dab plaster board. The fibre tape creates a strong bond between the membrane and the plaster application, and prevents the membrane from moving and therefore stops any cracking of plaster on these joints.
The Wykamol Universal Channel Outlet directs any water ingress from drainage channels into a sump chamber, as part of a Type C Cavity Drain Membrane System.
Wykamol Corner Tape is a 150 mm wide tape with many uses, but most commonly used to seal membranes from walls to floors and fixing perimeter drainage channels in place.
The Wykamol CM8 Mesh Membrane is a high-density polyethylene cavity drain membrane which allows the isolation of wet walls above and below ground. A high performance bonded mesh allows multiple finishes to be applied directly to the membrane.
Wykamol CM8 Waterproofing Membrane is suitable for type ‘C’ (drained protection) structural concrete constructions in accordance with BS 8102. When used for waterproofing basement floors and walls it is recommended that perimeter drainage channels are provided to optimise the flow of ground water towards the sump location.
CM3 Mesh Membrane is a water resistant membrane with studs forming a regular pattern on one face of the roll, and polypropylene mesh on the other side. It is tough but pliable and can be easily cut with a sharp blade to the correct size. Suitable for use above and below ground and can be rendered, plastered or dot and dab boarded on top.
Wykamol CM Brick Plugs are used to apply cavity drain membranes to the walls of both above and below ground applications. CM brick Plugs are of a high quality and can be used in a range of applications and on multiple substrate types. The tailor made Thermoplastic Elastomer seal ensures application of the membrane is water tight.
