Adomast Adocure Super

October 1, 2021

Adomast Adocure Super

Adam Lowe

ADOCURE SUPER/AL-90% Efficiency Concrete Curing Compounds
ADOCURE SUPER is UKWFBS listed as suitable for use on potable water schemes.
It physically “locks” moisture into freshly cast concrete surfaces to allow full hydration of the
cement thus allowing the concrete to fully “cure”. It does this by covering the surface of the concrete with a resin film which prevents moisture from leaving the surface.
Advantages
• Prevents premature drying out of the concrete surface, thus:
• Reducing the risks of surface cracking and
• Reducing the risk of surface dusting.
• Improves the durability of the concrete surface.
• Will enable the concrete to attain improved physical properties.
• 90% Curing efficiency.
• Easy to use, spray application

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Adomast PRODUCTS

October 1, 2021

Adomast Adocure Standard

Adam Lowe

Add to My Quote

Back to Adomast Products

PRODUCT DESCRIPTION

75% Efficiency Concrete Curing Compounds
ADOCURE STANDARD is UKWFBS listed as suitable for use on potable water schemes.
It physically “locks” moisture into freshly cast concrete surfaces to allow full hydration of the
cement thus allowing the concrete to fully “cure”. It does this by covering the surface of the concrete with a resin film which prevents moisture from leaving the surface.
Advantages
• Prevents premature drying out of the concrete surface, thus:
• Reducing the risks of surface cracking and
• Reducing the risk of surface dusting.
• Improves the durability of the concrete surface.
• Will enable the concrete to attain improved physical properties.
• 75% Curing efficiency.
• Easy to use, spray application

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Adomast PRODUCTS

October 1, 2021

Adomast Adobreak

Adam Lowe

Add to My Quote

Back to Adomast Products

PRODUCT DESCRIPTION

A bituminous/asphalt based compound which will harden on dowel bars to form a thin plastic sheath which after casting of concrete will allow dowel bars to completely break bond with concrete.

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Adomast PRODUCTS

October 1, 2021

Adomast Adobond SBR

Adam Lowe

Add to My Quote

Back to Adomast Products

PRODUCT DESCRIPTION

ADOBOND-SBR is a styrene butadiene emulsion for use as an admixture in cementitious compounds. Its use will improve many of the properties of the compound, improvements in many instances superior to those obtained by the use of other emulsions such as PVA’s and acrylics, especially under wet conditions of service.
ADOBOND-SBR is compatible with all types of Portland Cements including Sulphate Resisting, and with High Alumina Cements.
Advantages
• Excellent adhesion to concrete, brickwork, masonry,
renders, and steel
• Waterproof and weather resistant properties,
• Improved tensile and flexural strengths,
• Greater flexibility,
• Improved resistance to abrasion,
• Reduction in curing shrinkage,
• Reduced preparation on walls and floors prior to
application of screeds and renders.
• Water resistant screeds and renders,
• Waterproofing basement structures,
• Underlayment levelling screeds,
• Wear resistant flooring,
• Resurfacing mortars with feather edging properties
• Concrete repairs,
• Bonding

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Adomast PRODUCTS

September 26, 2018

Weber.tec-Guard-MCI

Supplies

Request Quote

Back to Weber Products

PRODUCT DESCRIPTION

weber.tec guard MCI is a clear surface-applied corrosion inhibitor designed to migrate through reinforced concrete and preserve embedded steel reinforcing bars. It forms a mono-molecular protective layer around the steel within a week of treatment depending on the permeability and moisture content of the concrete.

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Weber PRODUCTS

September 26, 2018

Weber.tec-EP-Tackcoat

Supplies

Request Quote

Back to Weber Products

PRODUCT DESCRIPTION

weber.tec EP tackcoat is a low-viscosity moisture-tolerant epoxy resin and liquid hardener system has been developed to provide a versatile priming coat suitable for both dry and damp surfaces and can be used at temperatures down to 7?C. Its main use is as a primer for other weber.tec EP compounds but may also be used to bond freshly mixed cementitious concretes mortars renders etc to existing sound concrete substrates.

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Weber PRODUCTS

September 26, 2018

Weber.cem-Grout

Supplies

Request Quote

Back to Weber Products

PRODUCT DESCRIPTION

weber.cem grout is a premixed non-shrink cementitious grout developed for applications where a cost efficient grout with adequate flow and strength is required. It is designed primarily as a pourable grout but can also be used at a plastic or dry pack consistency.

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Weber PRODUCTS

September 26, 2018

Weber.cem-Fairing-Coat

Supplies

Request Quote

Back to Weber Products

PRODUCT DESCRIPTION

weber.cem fairing coat is a preblended single-component blending coat

SYSTEM COMPONENTS

DOCUMENTATION

Health & Safety

Datasheet

ALL Weber PRODUCTS

September 26, 2018

Weber.cem-Conspray

Supplies

Request Quote

Back to Weber Products

PRODUCT DESCRIPTION

weber.cem conspray is a ready-to-use cement based concrete mix. It contains inert graded aggregates and dust suppressants. The formulation has been designed for dry process spray application to give rapid throughput reduced rebound and to maximise application thickness.