Sophisticated self-levelling sub-floor smoothing compound, can be applied to any thickness by trowel or pump. Even thick applications will be ready to receive floorcoverings within 24 hours at 20°C
The addition of ARDEX E25 Mortar Admix to ARDEX sub-floor smoothing compounds is recommended: where high abrasion or point load resistance is required; where used as a temporary wearing surface; where a floor paint or paint thickness coating is to be subsequently applied as a finish (check compatibility, suitability, and carry out a trial application before proceeding) or where the floor has underfloor heating.
Rapid setting and rapid hardening cement for floor screeds. Walkable after three hours. High strength – 30 N/mm2 after 24 hours – 58 N/mm2 after 28 days. Apply as bonded, unbonded or floating screed. Ceramic floor tiles can be fixed after three hours on bonded screed. Can be pumped – up to 40 minutes workability. Ideal base for in situ floorings, resin toppings, etc., as a bonded screed. Dryshake/sprinkle finish to produce a wearing surface. For internal and external use.
Surface damp proof membrane. Suppresses residual moisture in cement and sand screed and concrete floors. Can accomodate Hygrometer readings up to 98% RH. Guarantees the early laying of all floor coverings. Easy to apply and fast curing. Available in two colours to allow user to visually control coverage uniformity. Provides a bonding agent for Ardex A 35 rapid drying screeds.
ARDEX DPM 1C One Coat Damp Proof Membrane and a Residual Moisture Suppressant Features • Suitable for use on surfaces up to 98%RH • Suppresses residual constructional moisture in all concrete slabs and cement/sand screeds • Adheres to damp concrete and cement/sand screeds even at lower temperatures • Apply ARDITEX, ARDITEX NA or ARDITEX RS PLUS to ARDEX DPM 1C without priming • Allows the early laying of all floorcoverings when used with ARDEX smoothing and levelling compounds • Suitable for use on cement/sand screeds containing water based under floor heating systems • Can be used where no damp proof membrane is present or is ineffective
Fast setting screed bonding cement system. Fast setting bonding grout for use with ARDEX EB 2 screed. Just mix with water. Has excellent adhesion properties to prepared concrete for internal and external use.
Rapid settingn and hardening external repair mortar. For infilling holes around fittings and for patch work on wall and floor areas. Rapid hardening – walkable in 2-3 hours. For repairing stair treads and risers. To produce gradients for ramps. To smooth wall and floor areas from 2 to 30mm thick Easy to smooth and float. Stress and crack free. Wearing surface in lightly trafficked areas. Ideal for patch repairs prior to the application of suitable damp proof membranes.
Rapid hardening and drying internal repair mortar. Receives finishes after 11/2 hours. Slump free – ideal for vertical and horizontal repairs. Rapid repair of internal concrete sub-floors and concrete stairs. Fills holes and cracks in renders, screeds etc. Available in 11kg bags and 5kg tubs. Rapidry Formula.
Rapid hardening and drying cement for floor screeds. Used in place of Portland Cement in cement/sand screeds. ARDEX A 35 produces a floor screed that can be walked on after 3 hours and is dry enough to receive floor coverings after 24 hours regardless of screed thickness or 4 hours when smoothed with ARDEX A 55. After 1 day the compressive and tensile strengths of an ARDEX A 35 screed exceed the acceptable minimum attained by a conventional screed after 28 days.
Rapid drying pre-blended screeding and screed repair mortar. Cement and sand included – just add water. For new screeds or repairs to existing screeds Rapid hardening – walkable in 3 hours. Rapid drying – receives floorcoverings after 24 hours or 4 hours, when smoothed with ARDEX A 55, regardless of thickness. Conforms to EN13813 CT-C35-F6. Test with BRE screed tester after 6 hours. Apply as bonded, unbonded or floating screed. Rapid strength development. Rapid Formula.
