BASF MasterEmaco T 1100 TIX
MasterEmaco® T 1100 TIX, is a single component, fast setting and hardening thixotropic repair and bedding mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
[logo_carousel_slider].
MasterEmaco® T 1100 TIX, is a single component, fast setting and hardening thixotropic repair and bedding mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco S 5450 PG is a single component, extra high strength, high modulus, and shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco S 5400 is a single component, extra high-strength, high modulus, shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco P 5000 active primer, not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel.
MasterEmaco N 5200 is a universal, single component, polymer modified, fast setting, repair, reprofiling and levelling mortar that meets the requirements of the new European Norm EN 1504 part 3 class R2.
MasterEmaco T 1400 FR is a flowable steel fibre reinforced traffic repair mortar for large area repairs. Suitable for road nosings and exposure to extreme traffic conditions such as loading bays. Compliant to EN1504 part 3 class R4. CE
ARDEX R3 E Solvent Free Epoxy Primer is a two component solvent free epoxy resin for use with ARDEX polyurethane screeds and self-smoothing epoxy floor coatings.
Water based emulsion primer and bonding agent for use in the preparation of internal surfaces prior to the application of ARDEX SD-T.
Rapid drying industrial topping/wearing surface. Base mix and topping system available. Produces durable wearing surfaces in commercial and industrial areas. This versatile annd user friendly system can be installed from 5mm to 50mm over existing concrete surfaces and can recieve a range of finishes including suitable resin coatings, tiles and natural stone. Rapidry formula.
ARDEX K 301 Exterior Self-Smoothing Levelling and Resurfacing Compound is a special fast setting cement-based product designed to smooth and level rough and damaged concrete surfaces in external and internal situations. ARDEX K 301 is a grey powder consisting of special cements, graded aggregates and high quality synthetic resins. When mixed with water, a fluid mortar is produced which sets within 2 hours and can normally be walked on after approximately 2-3 hours at 20°C. ARDEX K 301 can be applied from 2mm to 20mm in thickness. The set and hardened ARDEX K 301 is usually ready to receive light wheeled traffic after 48 hours at 20°C
NORTHERN DISTRIBUTION CENTRE
MIDLAND DISTRIBUTION CENTRE
SOUTHERN DISTRIBUTION CENTRE
© 2023 EPMS Supplies Ltd - All Rights Reserved - Privacy Policy - Terms Of Service - GDPR
This product has been added to your quote.
Click below to go to your quote page, or click ‘close’ to continue browsing.