Cetco Coreflex XP
COREFLEX XP is a 1.5 mm nominal thermoplastic membrane reinforced with a 90 gram/ sqm polyester reinforcing scrim integrally bonded to an XP Technology Core.
[logo_carousel_slider].
COREFLEX XP is a 1.5 mm nominal thermoplastic membrane reinforced with a 90 gram/ sqm polyester reinforcing scrim integrally bonded to an XP Technology Core.
CETSEAL is a multi-purpose, single component polyether moisture cure sealant/ adhesive. CETSEAL is a low VOC, 100% solids, non-shrinking product with excellent UV resistance.
CETBIT 300 is a self-adhering waterproofing membrane consisting of 1.4 mm of rubberized bitumen integrally bonded to a 0.1 mm cross-laminated HDPE protective film.
BENTOSEAL® is trowel-grade, sodium bentonite/ butyl-rubber based mastic designed for a variety of surface preparation and waterproof detailing work with select CETCO waterproofing membranes.
MASTERFLOW® 648 CP PLUS Grout is manufactured from the highest quality epoxy resins and carefully graded high strength inert fillers. MASTERFLOW® 648 CP PLUS formulation incorporates the best features of the previous range of MASTERFLOW® epoxy grouts which have made them world leaders in heavy machinery grouting in harsh environments for over 40 years. (First installation 1956).High ultimate compressive, flexural and tensile strengths. Therefore able to withstand heavy static and dynamic loads
MASTERSEAL® F1131 is a water based coating based on acrylic polymers. This one-component emulsion cures to a crack-bridging, protective, carbonation inhibitor and weather proof coating with a smooth decorative finish. Solvent-free
MASTERKURE® 181 is a non-degrading, membrane forming liquid based on acrylic resin suitable for spray application to freshly poured concrete. Improves abrasion resistance of floors. Reduces chloride penetration.
MASTERTOP® 524 is a polymer modified shrinkage compensated, cementitious, self levelling floor screed in powder form requiring only the addition of water. The fluid consistency allows rapid installation rates and fine tolerances using mix and pump machines. Suitable for application depths between 2 – 25mm. Low odour formulation
AQUADRAIN 8MM is a cost-effective drainage sheet designed to replace or complement aggregate drainage backfills. It is designed primarily for vertical sub-surface applications requiring moderate compressive strength and flow capacity.
MASTERSEAL® F1120 is a single component coating, based on water dispersion acrylic polymers. This emulsion is suitable as a smooth and protective finish resistant against weathering. For inside and outside, above ground level.
NORTHERN DISTRIBUTION CENTRE
MIDLAND DISTRIBUTION CENTRE
SOUTHERN DISTRIBUTION CENTRE
© 2023 EPMS Supplies Ltd - All Rights Reserved - Privacy Policy - Terms Of Service - GDPR
This product has been added to your quote.
Click below to go to your quote page, or click ‘close’ to continue browsing.