Cemprotec E-Floor HB is a two component epoxy and cementitious modified polymer topping for the protection of concrete floors in demanding environmental conditions.
Cemprotec Clutch Filler is a two component, water based, epoxy and cementitious modified polymer mortar for sealing the interlock or clutch between sheet piles. It incorporates advanced cement chemistry, microsilica, fibre, epoxy and styrene acrylic copolymer technology to provide multi-functional protection with enhanced chemical resistance. When mixed, it can be applied with a pointing gun exhibiting a high degree of thixotropy to enable ease of application and filling of the void without sagging. It is specially formulated to chemically accelerate the passivation of ferrous metals even in the presence of chlorides and give maximum adhesion to steel.
Cementitous Coating 851 is a two component, thixotropic, cementitious modified polymer coating with high adhesion to both steel and concrete. Cementitous Coating 851 forms a hard, highly alkaline coating with a degree of elasticity which not only protects the concrete, or other substrates, from the effects of aggressive acid gases, moisture and chlorides, but also has greatly enhanced chemical resistance.
Bonding Bridge 842 is an advanced polymer modified, cementitious, surface impregnant with high penetration of concrete. Bonding Bridge 842 further increases the adhesion of Flexcrete repair mortars and prevents rapid drying at the repair/concrete interface on porous backgrounds with high suction.
Bitukold is a cold hand applied, thixotropic bitumen emulsion designed for sealing vertical joints.
EUCO QWIKJOINT 200 is a fast-setting, semi-rigid polyurea used for filling control and construction joints in industrial concrete floors. EUCO QWIKjoint 200 represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. Among these benefits are a super-fast set time and an extended shave time: EUCO QWIKjoint 200 can be trimmed flush with the floor immediately after placement or up to 24 hours later. EUCO QWIKjoint 200 supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges.
EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyureathane, primarily used for filling construction and control joints in industrial and commercial concrete floors.
Flexcrete Bond Primer is a two component, water based product consisting of a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B). When mixed it produces a slightly viscous, milky green dispersion for application by brush, roller or airless spray to prime and stabilise a wide range of building substrates prior to the application of specialist membranes and sealants in the Flexcrete range. It cures to form a clear film with a green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
POWERFUL SURFACE TREATMENT FOR NEUTRALISING ACTIVE MOULD, FUNGAL AND BACTERIAL GROWTH PRIOR TO THE APPLICATION OF PRODUCTS IN THE FLEXCRETE RANGE.
Leochip VLS is a cold applied, durable surface dressing binder. Leochip VLS is ideal for producing a high quality, natural and aesthetically pleasing finish to drives and footpaths.
