Weber

weber.cem keycoat is a single-component polymer-modified cementitious bonding aid and steel reinforcement primer. It requires only the addition of clean water to produce a bonding slurry for the weber.cem range of repair mortars cementitious screeds renders and new to old concrete. This product contains migrating corrosion inhibitor to protect the steel reinforcement within the repair zone and reduce the rate of corrosion within the vicinity of the repair.

flexirend highbuild is a decorative and protective resin based surface coating for application to exterior and interior surfaces. It is a high quality, weather resistant finish, which may be textured to a variety of designs. It is available in a range of colours and provides a superior quality appearance to cement rendering, concrete and many other backing materials.

cullamix tyrolean is a white or coloured cement based mix which provides a decorative and protective rendering. It is applied by hand or power operated machines and provides an open honeycomb textured (tyrolean) finish.

Five Star repair concrete CP is a preblended cementitious repair concrete which fully complies with the Highways Agency Specification for Highways Works Class 29F high-strength flowing concrete. Contains non-reactive aggregates and a low soluble-alkali cement content suitable for use where cathodic protection will subsequently be used. Contains superplasticiser and shrinkage compensating agents. does not contain microsilica.

Five Star repair concrete is a preblended cementitious repair concrete which fully complies with the Highways Agency Specification for Highway Works and Department of Transport specification BD 27/86 for a high strength flowing concrete. Contains non-reactive aggregates and a low soluble alkali cement content. The repair concrete can be applied to a range of thicknesses minimum 15mm. Contains RHPC & PFA to clause 1702 5mm non-reactive carboniferous limestone to clause 1704 microsilica and shrinkage compensating agents.

weber.tec guard MCI is a clear surface-applied corrosion inhibitor designed to migrate through reinforced concrete and preserve embedded steel reinforcing bars. It forms a mono-molecular protective layer around the steel within a week of treatment depending on the permeability and moisture content of the concrete.

weber.tec EP tackcoat is a low-viscosity moisture-tolerant epoxy resin and liquid hardener system has been developed to provide a versatile priming coat suitable for both dry and damp surfaces and can be used at temperatures down to 7?C. Its main use is as a primer for other weber.tec EP compounds but may also be used to bond freshly mixed cementitious concretes mortars renders etc to existing sound concrete substrates.