Structural Waterproofing and Membranes

Proofex LM Two component bituminous rubber emulsion with special hydraulically hardening fillers. For the waterproofing of intricate details e.g. pipe entries, covings etc

Proofex Hydromat consists of two elements – Natural sodium bentonite as the sealing material, Two layers of geotextile to encapsulate and contain the bentonite. A continuous layer of natural sodium bentonite is sandwiched between a needle-punched polypropylene geotextile (the cover layer) and a slit film woven geotextile (the carrier layer). The components are needle-punched together uniformly across the membrane to hold the bentonite sealing material in a stable position.

Proofex Cavitydrain is a profiled HDPE with ribbed conical voids spaced to permit high water flow through a permanent void against the sub-structure face. Mortar or concrete is poured into the conical voids on the internal face of the drainage former allowing high load transfer to structural elements.

Proofex 3000 is a cold applied, flexible, waterproof, high performance membrane incorporating a cross laminated HDPE carrier film with a polymer modified bitumen compound.

Flexible cementitious waterproofing coating. suitable for use in potable water tanks, reservoirs, canals and culverts. The material can be used on concrete, brick and blockwork substrates.

Bitumen/rubber latex waterproofing emulsion. Mulseal is suitable for uses such as waterproof membrane to retaining walls, as a vapour barrier to panels and repairing fine cracks in asphalt surfaces.