Structural Waterproofing and Membranes

SikaProof® Ex-Tape 150 is a self-adhesive tape, consisting of a butyl rubber adhesive that is covered with a divided release liner.

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers.

Sika Membran System consists of flexible synthetic rubber of different grades, Universal, Outdoor and Strong. The different grades are secured and sealed in place using SikaBond TF plus and SikaLastomer TF. Used for waterproofing buildings with ventilated curtain facades.

Highly expansive solvent-free water-reactive two part polyurethane foam injection system with long potlife. Sika Injection-20 is used for stopping water infiltration and to be injected into water filled cracks

Sika Drain-850 Geo is a heavy duty drainage and protection sheet produced from high density polyethylene (HDPE) with dimples 10 mm high and a filtration layer of geotextile (PP) bonded on the top.

The Sika Standard Drainage Membrane is an 8 mm polypropylene studded membrane.

The Sika Plaster Drainage Membrane is a 5 mm high-density polyethylene cavity drainage studded membrane.

The Sika HD20 Membrane is a high-density polyethylene, high capacity cavity drainage membrane.

Sika® BituSeal S-115 is a post applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non woven fabric. It has a silicone-treated release liner on the upper and lower surface.

Sika BituSeal Primer is a bitumen solution to be used in conjunction with Sika® BituSeal S-115.