Conbextra HF is used for free flow, non-shrink, cementitious grouting of gap thicknesses 10 to 100 mm. Conbextra HF is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free-flowing grout for gap thicknesses up to 100 mm. In addition the low water requirement ensures high early strength and long-term durability.
Conbextra GP is used for general purpose, non-shrink cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications at flowable consistency include stanchion base plates, bolt pockets and void filling. At trowellable consistency Conbextra GP is recommended for bedding load bearing components.
Conbextra EP is For use in situations where heavy dynamic or mobile loads are encountered, e.g. reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges and drop forges. Also for use in conditions where chemical spillage may be encountered. Typical situations could be met in refineries, electroplating works and chemical plants.
Conbextra BB is a ready to use cementitious grout supplied in 25 kg moisture resistant bags. It has been formulated specifically for grouting of bridge bearings and parapet post baseplates. The dry powder is a blend of Portland cements, graded silica sands and additives to which only a controlled amount of clean water is added in situ to produce a highly flowable, non shrink grout.
Cebex 100 is an admixture for site batched cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.
MASTERFLOW® 648 CP PLUS Grout is manufactured from the highest quality epoxy resins and carefully graded high strength inert fillers. MASTERFLOW® 648 CP PLUS formulation incorporates the best features of the previous range of MASTERFLOW® epoxy grouts which have made them world leaders in heavy machinery grouting in harsh environments for over 40 years. (First installation 1956).High ultimate compressive, flexural and tensile strengths. Therefore able to withstand heavy static and dynamic loads
MASTERFLOW® 885 is a ready to use product in powder form, which requires only the on-site addition of water to produce a non-shrink, metallic reinforced grout of predictable performance. Use of specially processed manageable metallic aggregate improves impact and dynamic loading resistance compared with normal cementitious grouts.
MASTERFLOW® 765 is a ready to use, non-shrink construction grout. It can be used as fluid or plastic consistencies for grouting of equipment and machinery, bearing pads, rails and anchoring. Non shrink for effective contact and support. High early strength for rapid installation and use of plant. Durable, uniform dense structure. Good workability into gap widths of down to 5mm for up to 1 hour at 20°C.
weber.cem grout is a premixed non-shrink cementitious grout developed for applications where a cost efficient grout with adequate flow and strength is required. It is designed primarily as a pourable grout but can also be used at a plastic or dry pack consistency.
Rapid setting cementitious bedding mortar used for the installation and levelling of street ironwork. It is particularly useful where interruption to traffic flow must be minimised. It allows the bedding and installation of manhole frames and gulleys and their return to use in less than 45 minutes.
