Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be installed after 24 hours with natural stone installation possible after 2 days. Requires the addition of aggregates and water.
Medium strength (40 MPa) fibre-reinforced thixotropic mortar for the repair of concrete. Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and corners of columns and beams. Mapegrout T40 is also recommended for repair work in tunnels, canals and water works in general.
Controlled-shrinkage fibre-reinforced fluid grout for concrete repair. Use Mapegrout Hi-Flow for all concrete repairs that require the use of fluid mortars, such as reinforced concrete beams and columns and floors. Made from cement binders, graded aggregate, special additives and synthetic fibres, Mapegrout
One-component, fibre-reinforced, compensated-shrinkage, sulphate-resistant thixotropic mortar, particularly suitable for repairing concrete structures with a rendering machine.
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.
BETEC®350 is a single component cementitious compound which is polymer modified and fibre reinforced. It is a rapid setting, high strength, waterproof compound used to seal tieholes that are created by formwork tie bars.
Proofex WG is a three-component system consisting of base resin, liquid hardener and specially graded inert fillers. It is suitable for thicknesses from 20-100 mm.
Polyester resin anchoring grout. Lokfix mix and place anchoring grouts are used for high-strength corrosion resistant anchoring of bolts and bars into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required.
Conbextra UW is used for free flow or pumped grouting applications underwater or in tidal zones. There will be no significant wash-out of the cement phase. Applications include bridge columns, quay pillars, concrete piling, slipways and dams.
Conbextra TS is used to grout gap thicknesses 75-500 mm. Applications include grouting thick section voids beneath baseplates; voids around below-ground tanks; large bolt pockets etc.
