Proofex Total is a black, 6-layer, reinforced, totally gas impermeable membrane comprising an aluminium foil layer and a polyester reinforcing grid sandwiched between four layers of polyolefins. Reinforced gas membrane designed to protect buildings and their occupants from the effects of methane, radon, carbon dioxide and other harmful gases.
Cemprotec Elastic is a cementitious modified, polymer rich coating which maintains its elastomeric properties even under immersed conditions. It is ideally suited for waterproofing and protecting concrete and masonry structures which are exhibiting cracking where further movement is expected. Typical applications include treatment of water towers and tanks, roofs of reservoirs and surfaces in contact with potable water
Surface damp proof membrane. Suppresses residual moisture in cement and sand screed and concrete floors. Can accomodate Hygrometer readings up to 98% RH. Guarantees the early laying of all floor coverings. Easy to apply and fast curing. Available in two colours to allow user to visually control coverage uniformity. Provides a bonding agent for Ardex A 35 rapid drying screeds.
ARDEX DPM 1C One Coat Damp Proof Membrane and a Residual Moisture Suppressant Features • Suitable for use on surfaces up to 98%RH • Suppresses residual constructional moisture in all concrete slabs and cement/sand screeds • Adheres to damp concrete and cement/sand screeds even at lower temperatures • Apply ARDITEX, ARDITEX NA or ARDITEX RS PLUS to ARDEX DPM 1C without priming • Allows the early laying of all floorcoverings when used with ARDEX smoothing and levelling compounds • Suitable for use on cement/sand screeds containing water based under floor heating systems • Can be used where no damp proof membrane is present or is ineffective
The introduction of Dryzone revolutionised the treatment of Rising Damp. Dryzone comes in the form of a water-repellent cream packed in a 600ml foil cartridge to minimise environmental impact. The Dryzone cream is introduced by means of a simple applicator gun into a series of holes drilled into the mortar course. Once the Dryzone is installed, it uses the moisture contained in the damp wall to diffuse to where it is most needed before curing to form a water repellent resin.
There are no system components for this item
Stormdry is a colorless, breathable, water-repellent treatment for brick, concrete and stone walls. It is supplied in the form of a deeply penetrating cream that is applied to the wall surface using a roller or brush. Once Stormdry has been applied to the wall surface, it will permeate deeply before curing to form a water-repellent barrier.
There are no system components for this item
Solar reflective roof paint for application to bituminous roof systems. may be applied to a wide range of substrates including metal, bitumen coatings and bitumen membranes. Its bright aluminium colour gives good heat, UV and light reflective properties, ideal for reducing solar heat gain on dark coated roofs, tanks and similar surfaces.
There are no system components for this item
IKO Hyload Permabit DPC system is a flexible bitumen polymer sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as a cavity tray to prevent the downward movement of water.
There are no system components for this item
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.
There are no system components for this item
High performance brush applied damp proofing emulsion containing synthetic rubber latex, which provides a waterproof, and vapour resistant, black elastomeric membrane.
There are no system components for this item
