Weber-Cullamix-Tyrolean
cullamix tyrolean is a white or coloured cement based mix which provides a decorative and protective rendering. It is applied by hand or power operated machines and provides an open honeycomb textured (tyrolean) finish.
[logo_carousel_slider].
cullamix tyrolean is a white or coloured cement based mix which provides a decorative and protective rendering. It is applied by hand or power operated machines and provides an open honeycomb textured (tyrolean) finish.
Five Star repair concrete CP is a preblended cementitious repair concrete which fully complies with the Highways Agency Specification for Highways Works Class 29F high-strength flowing concrete. Contains non-reactive aggregates and a low soluble-alkali cement content suitable for use where cathodic protection will subsequently be used. Contains superplasticiser and shrinkage compensating agents. does not contain microsilica.
Five Star repair concrete is a preblended cementitious repair concrete which fully complies with the Highways Agency Specification for Highway Works and Department of Transport specification BD 27/86 for a high strength flowing concrete. Contains non-reactive aggregates and a low soluble alkali cement content. The repair concrete can be applied to a range of thicknesses minimum 15mm. Contains RHPC & PFA to clause 1702 5mm non-reactive carboniferous limestone to clause 1704 microsilica and shrinkage compensating agents.
Vandex Unimortar 1 is a versatile waterproofing and repair mortar for concrete and masonry (tested in accordance with EN1504-3). It may be applied to horizontal and vertical surfaces using a trowel. Spray application is also possible.
Vandex Unimortar 2 is a cementitious, ready-mixed waterproofing and repairing mortar with hydrophobic properties. It is water and moisture resistant and is intended for use on horizontal surfaces.
Sikagard ElastoColor-675 W is a one part, plasto-elastic water dispersed coating based on a styrene acrylate dispersion for the protection and enhancement of fairfaced concrete. Sikagard ElastoColor-675 W can be applied over existing coatings or directly onto the concrete surfaces.
SikaGard-720 EpoCem is a three-part, epoxy-modified, cementitious, thixotropic, fine textured mortar for levelling and finishing of concrete, mortar or stone surfaces
Sikagard 700 S is a one part water repellent impregnation for absorbent cementitious substrates. It penetrates well into the open pores of the substrate, providing a durable water repellency, while still allowing water vapour diffusion in both directions.
NORTHERN DISTRIBUTION CENTRE
MIDLAND DISTRIBUTION CENTRE
SOUTHERN DISTRIBUTION CENTRE
© 2023 EPMS Supplies Ltd - All Rights Reserved - Privacy Policy - Terms Of Service - GDPR
This product has been added to your quote.
Click below to go to your quote page, or click ‘close’ to continue browsing.