Sikafloor-1 MetalTop is a one part, preblended, coloured metallic dry shake hardener for concrete comprising of cement, hard metallic ferro silicon aggregates, special admixtures and pigments.
SikaScreed P-24 is a ternary cement binder for the production of low-shrinkage cement screeds for rapid use and covering.Suitable for heated and unheated screeds that are laid bonded or unbounded, over insulation or monolithically for interior use, with the capability for pedestrian traffic after 5 hours and covering after 24 hours, with all types of flooring
RonaScreed 4 Day Overlay Quick Drying Screed additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds.
RonaScreed 1 Day Overlay Rapid Dry Screed is a cement replacement for rapid drying screeds used when laying bonded, unbonded or floating screeds prior to covering with vinyl sheet or other coverings.
This product is based on a Natural Cement based binder and an anti-carbonation coating that can also be used as a concrete repair mortar. It is an environmentally friendly, fast setting, high early strength concrete repair material that starts to set in 35 minutes. NATCEM AC only requires to be added to water and mixed for 2 minutes (see mixing instructions for further details), and unlike most other manufacturers products does not require primers, bonding agents and or curing agents. It can be used in cold & wet conditions, sets under water and from a minimum of 3 mm can be, if required, built up layer on layer to any thickness. It is also Reg.31 approved for contact with drinking water with only ½ hour curing period after set required.
Cemtop products consist of a blend of selected cements and aggregates modified with polymers and flow agents. The products are used in conjunction with Nitoprime 33.The products are supplied as a grey powder which requiresonly the addition of water to produce self smoothing, free flowing material.
Monolevel FC is a single component, thixotropic, polymer modified, cementitious mortar with high adhesive properties, allowing it to be used as a thin screed, as well as a filler, for filling minor voids and defects to provide a fair faced finish. It incorporates the most advanced microsilica, fibre and polymer technology, curing to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. The product is supplied as a single component system, ready for on-site mixing and use, requiring only the addition of clean water.
Monomix HD is a high strength, shrinkage compensated mortar with good abrasion resistance for the structural repair, rendering and profiling of both vertical and horizontal surfaces including trafficked areas.
Cemprotec EF Primer is a modified, styrene acrylic copolymer impregnant with high penetration, to stabilise and seal cementitious and asphalt floors prior to the application of the Cemprotec range of cementitious coatings and mortars.
