MASTERKURE® 181 is a non-degrading, membrane forming liquid based on acrylic resin suitable for spray application to freshly poured concrete. Improves abrasion resistance of floors. Reduces chloride penetration.
MASTERSEAL® F1131 is a water based coating based on acrylic polymers. This one-component emulsion cures to a crack-bridging, protective, carbonation inhibitor and weather proof coating with a smooth decorative finish. Solvent-free
MASTERFLOW® 648 CP PLUS Grout is manufactured from the highest quality epoxy resins and carefully graded high strength inert fillers. MASTERFLOW® 648 CP PLUS formulation incorporates the best features of the previous range of MASTERFLOW® epoxy grouts which have made them world leaders in heavy machinery grouting in harsh environments for over 40 years. (First installation 1956).High ultimate compressive, flexural and tensile strengths. Therefore able to withstand heavy static and dynamic loads
MASTERTOP® 524 is a polymer modified shrinkage compensated, cementitious, self levelling floor screed in powder form requiring only the addition of water. The fluid consistency allows rapid installation rates and fine tolerances using mix and pump machines. Suitable for application depths between 2 – 25mm. Low odour formulation
MASTERSEAL® F1120 is a single component coating, based on water dispersion acrylic polymers. This emulsion is suitable as a smooth and protective finish resistant against weathering. For inside and outside, above ground level.
MASTERSEAL 590 is a single component hydraulic cement-based, fast-setting, repair mortar that instantly stops running water or active moisture seepage though holes or cracks in concrete or masonry.
MASTERSEAL 583 is a blend of Portland cements, selected aggregates and spray dried polymer modifying agents. The aggregates are carefully graded. When mixed with clean water to a slurry consistency, MASTERSEAL 583 can be applied easily with a stiff hand brush, broom or spray equipment.
MasterSeal 600 is an acrylic polymer liquid additive for cement mixes, designed to enhance their physical characteristics, ease application and increase wear and weather resistance.
MasterSeal 581 is a cement based waterproofing material that forms a brushable slurry when mixed with specified quantity of water, for coating on to prepared concrete and masonry surfaces.
MASTERFLOW® 765 is a ready to use, non-shrink construction grout. It can be used as fluid or plastic consistencies for grouting of equipment and machinery, bearing pads, rails and anchoring. Non shrink for effective contact and support. High early strength for rapid installation and use of plant. Durable, uniform dense structure. Good workability into gap widths of down to 5mm for up to 1 hour at 20°C.
